Ilya Muromets (Cataphract Hero Mech) 3x UAC5 Guide

With the recent buff to UltraAC5s, this build has become even more fearsome than it was before. An Ilya Muromets armed with 3x UAC5s, and 2x Medium Laser is a beast. This Cataphract destroys Assault Mechs in seconds. You will have no trouble at all melting through the center torsos of your enemies, hence the nickname “Chainsaw”. The build is reasonably heat efficient and has enough ammo to pump out more than 1,000 damage per match. The only downside is your exposed front, carrying an XL-engine.

The first version of the build is the most offensive one. This is the maximum possible amount of ammo you can carry. Kaffeangst, myself, and other friends of mine are running this version to great success. 7 kills and 800 damage are no rare sight. However, this version of the Ilya Muromets Chainsaw build is not suited for absolute beginners. If you are new to the game or ballistic heavy builds, I do not recommend this version. You have to know what you are doing at all times and a reasonable level of teamwork, reflexes, and aiming is required.

If you would like to play this build in more of a support role or a newer player, use the following version. It trades some ammo for a larger engine and the addition of AMS. The increased movement speed and the Anti-Missile-System allow you to make more mistakes and support your team, even if you are not destroying Mechs fulltime. Use this build if you see yourself more like a 2nd line of fire guy which sticks behind the large team and assists as necessary.

• Cataphract plus XL-engine is problematic. If you are eating carefully aimed sniper shoots, LRMs, or high frontal damage, you are done for. Whenever you are being hit by anything mentioned here, get to cover. Do not return fire. Also do not make the mistake to peak around the same corner a few seconds later. You will die a quick but horrible death and be no good to your team, because all that sweet ammo is smoldering in your corpse.
• Since your weapons are firing from a very low point, you must expose yourself almost completely in order to fire properly. That being sad, you should always try to flank the enemy or fire at enemies who do not or can not return fire. The two Medium Lasers are mounted a bit higher, so when in doubt, use your lasers first.
• Weapon grouping advice: 1) All three UltraAC5s 2) Both Medium Lasers. In addition, you can create weapon groups for chain firing the UAC5s, only the arm-mounted ones, or a group for left and right UACs to fire around corners without wasting ammo.
• Ammo is precious and UltraAC5 ammo weighs a lot. Make every shoot count. If you are unsure whether or not you will hit the target, do not fire or use your lasers.
• UltraAC5s are excellent weapons to scare off enemies. However, you want to kill enemies. If you can flank or sneak up on an enemy, wait until you have a clear shoot and hold that trigger down. Early hits will waste ammo and your opponent has more time to react.
• Preferred control options are disabled arm-lock and holding down the weapon group which contains all three of your UltraAC5s. Only use the lasers on colder maps or if you are unsure you can hit properly.

If you are looking for a macro which prevents your UltraAC/5s from jamming, check out our guide on how to setup Fire Control.

Here is a screenshot of what an average round can look like for you soon.

 

---

Get Connected!

If you know of an excellent build, resource, or guide, submit it and maybe it will be featured on mwo-builds.net and seen by thousands of players. You can submit builds by sending us an e-mail, post it in the official looking-for-builds thread, or send us a private message via the official forums. You can also submit guides and builds via Facebook or Twitter (see below). Join hundreds of other Mechwarrior enthusiasts and like us on Facebook and follow us on Twitter. Receive the latest guides and the best MWO builds directly to your favourite social platform!

Follow @mwobuildsnet

---

Read More

Misery (Stalker Hero Mech) Sniper/Fire Support Hybrid Guide

In my long search for finding a good Misery all-round build, I suffered many setbacks. After consulting with several high-level players from the Hell’s Black Aces merc-corp, I finally developed a build which is worthy of this web page. A sniper/fire support hybrid build utilizing a pair of Large Lasers, a single ERPPC, and a Gauss Rifle. All of this while still being reasonably heat efficient and using a standard engine. The only downside, in comparison to other Stalker builds, is its relatively low movement speed. This guide will showcase several variations of the same build. Each build has a slightly different focus. Choose the one whichever suits your play-style and needs best.

The first version of the Misery sniper hybrid build trades leg armor and heat efficiency for more utility. ER Large Lasers replace the regular Large Lasers for additional range. The increased effective range will greatly improve your damage dealt values. ER Large Lasers also received a buff in the recent patch. The original version uses two tons of Gauss Rifle ammo. If you are engaged in drawn out fights (which is more likely since 12 vs 12 hit the servers), 20 shots will be expended very quickly. This version uses the additional space and tonnage to fit in a third ton of ammo. The addition of an AMS rounds the package. This version runs very hot, and you will most likely not be able to carry a cool-shot consumable since the Stalker chassis only allows for two module slots (which are most likely taken by Adv Seismic Sensor and Increased Sensor Range).

The following load-out reflects the original version of the build. It has a lesser range, fewer ammo, and no AMS. However, it runs significantly cooler, allowing a skilled pilot to continuously fire for a long time. This version is recommended for more experienced as it requires more skill to dish out the same amounts of damage of the course of a battle. However, it has the potential to be more deadly in the long run.

• Since you are not very fast and lack jump-jets, positioning is key. Only expose yourself from cover to fire one alpha strike. If enemies have spotted you and are returning fire, double back behind cover and find a different spot to peak out from.
• Weapon grouping advice: 1] Gauss Rifle + ERPPC 2] Both (ER) Large Lasers. Be sure to bind the Gauss Rifle and ERPPC to a single weapon group as well. There are situations when you’ll want to fire only one of them.
• Try to stay on target while firing the Large Lasers. If you manage to hit the same component for the majority of the duration, you will notice a significant increase in efficiency. Large Lasers do a lot of damage, but over a duration. Remember: Lasers in MWO are no light sabres!
• Enabling Arm-Lock is not recommended for this build. However, whenever you can, try to match both crosshairs before firing a sniper shoot (ERPPC + Gauss Rifle) for maximum pin-point damage.
• If you are running on high heat, get behind cover and cool down for a few seconds. If that is not possible, place one or two well aimed shots with your Gauss Rifle. Then finish the exposed target with an alpha strike.

Here are some end-of-round screenshots. They are not the best, but I wanted to include some 12vs12 action!

---

Get Connected!

If you know of an excellent build, resource, or guide, submit it and maybe it will be featured on mwo-builds.net and seen by thousands of players. You can submit builds by sending us an e-mail, post it in the official looking-for-builds thread, or send us a private message via the official forums. You can also submit guides and builds via Facebook or Twitter (see below). Join hundreds of other Mechwarrior enthusiasts and like us on Facebook and follow us on Twitter. Receive the latest guides and the best MWO builds directly to your favourite social platform!

Follow @mwobuildsnet

---

Read More

Cataphract 2X Brawler Build

I am a great fan of the Cataphract chassis. I bought a 4X, 2X, and 1X right when they came out. However, the CTF-3D and the Hero Mech variant “Ilya Muromets” are much more popular. While those are really fun and powerful variants, I wanted to beat something with my 2X and 1X. So this guide came to life. See how a Cataphract 2X can easily deal as much damage as the more popular variants. People will only underestimate you until you blasted the second Assault Mech in their team to bits.

This build features everything you need. The Cataphract 2X brawler build is like the whole family fun package. A Gauss Rifle for long range shots and in order to add critical pinpoint damage while brawling. It can also be used in the rare case of running on high heat. Three Medium Lasers will serve as your all-purpose weapons. Finally, double SRM6 will be your melee range blaster. The recent MWO patch buffed their damage even further. Note, that all screenshots where taken before this patch and the damage values were already insanely high. Especially when encountering Assault Mechs, the SRM6s will provide the critical damage needed to take them down quickly.

• Although your Cataphract 2X is equipped with a Gauss Rifle, the most damage can be dealt at close range. Try to engage in brawls early on for maximum output.
• This build is very heat efficient. Do not fear to fire all weapons at all times. In the rare case of running on high heat, continue firing your SRM6s and the Gauss Rifle only.
• The combination of a Cataphract chassis and an XL-engine make you very susceptible to frontal attacks. Try to hug buildings, ledges, and cliffs at all times.

Note, that the following screenshots where taken before the recent buff to SRM damage. You should be able to easily reach or even surpass those numbers.

---

Get Connected!

If you know of an excellent build, resource, or guide, submit it and maybe it will be featured on mwo-builds.net and seen by thousands of players. You can submit builds by sending us an e-mail, post it in the official looking-for-builds thread, or send us a private message via the official forums. You can also submit guides and builds via Facebook or Twitter (see below). Join hundreds of other Mechwarrior enthusiasts and like us on Facebook and follow us on Twitter. Receive the latest guides and the best MWO builds directly to your favourite social platform!

Follow @mwobuildsnet

---

Read More

Ever wondered if you should buy double heat sinks for one of your mechs, but didn´t want to spend so many millions just to try it and fail? Ever wondered how exactly the internal structure of the new mech you are saving for looks like? If it is at all possible to make that armament work? Wouldn´t it be nice to have an online tool that simulates the mechbay from Mechwarrior Online 1:1 and always have the most up-to-date patching data? Look no further, your prayers have been answered:

A guy named Smurfynet made a stats look-up site which automatically generates the data from the game files. In this way it is accurate at all times. However, the most excellent feature of the page is a mechbay simulator. It works exactly like the current mechbay in the game and allows you to plan and experiment with builds. If you register for the site you will also be allowed to store mech setups in your personal online mechbay.

Link to the Smurfy free online Mechbay tool – Click here!

The builds on this site will feature a link in the following style which you can simply click to view the setup on smurf-net:

Be sure to check out the thread in the official forums and drop him a like:

Read More